NA-NB Miata
Frame Rail Reinforcements & Butterfly Brace
Frame Rail Reinforcements & Butterfly Brace
Couldn't load pickup availability
Engineered from the ground up for drivers demanding maximum chassis stiffness without compromise, the DCN Performance Frame Rail Reinforcement and Butterfly Brace system replaces legacy, folded sheet-metal designs with a space-frame-like triangulated RHS substructure. Built using precision in-house laser cutting and laser welding, this system delivers an unmatched stiffness-to-weight ratio for high-grip street, track and motorsport MX-5 builds. Significantly stiffer system than alternatives, at only 15.5kg weight (~34lbs).
Rethinking the Frame Rail from First Principles
For over two decades, all aftermarket frame rail braces have relied on the same fundamental design: thin, open-section U-channels meant to slip tightly over the factory rails. On 20-to-35+-year-old NA and NB Miatas, factory frame rails are almost universally crushed, dented, or corroded, meaning open-channel braces designed to slip fit over them require hours of hammering to fit, to then end up resting on only a few isolated contact points.
We instead built our reinforcement around a closed Rectangular Hollow Section (RHS) running the full length of the frame rail. A closed box section is dramatically stiffer in both bending and torsion than an open sheet-metal channel, allowing the DCN rail to structurally replace factory rails rather than relying on them.
Each rail assembly is precision laser-cut and laser-welded in-house, featuring a continuous 1,090 mm (~43 in.) laser seam weld along the top and an intermittent laser stitch weld along the bottom. This level of continuous, distortion-free weldment is virtually impossible to achieve with conventional MIG or TIG welding.
Key features of Frame Rail Reinforcements:
- 2.9x Higher Torsional Rigidity: Delivers 2.9x the torsional stiffness of leading market alternative rail reinforcements, at just 1.5x the weight, transforming turn-in response and eliminating cowl shake.*
- Integrated Closed Box Section Architecture: A full-length Rectangular Hollow Section restores complete structural integrity, even on chassis with heavily crushed or rusted OEM frame rails.
- Zero-Hammering Installation: Designed with a generous 10 mm (~3/8") internal clearance, the rail reinforcements slip effortlessly over bent or mushroomed factory rails without requiring bodywork prior to installation.
- Track-Ready Jacking & Impact Resistance: The tough RHS profile can handle floor-jack lifting and curb impacts with minimal wear.
-
OEM Brake & Fuel Line Protection: Fuel and brake lines remain in OEM position for maximum protection.
- Frame Rail Reinforcements Weight: 9.5kg (~21lbs)
Key features of Butterfly Brace:
- Direct Load Path: The butterfly braces transfer loads directly into the Frame Rail RHS, creating a continuous structural loop that resists chassis torsion exceptionally well.
- 4-Step Adjustable Exhaust Clearance: Offset mounting flanges allow you to fine-tune ground and exhaust clearance across 4 discrete positions—from 0 mm (flush with the frame rails) down to -20 mm (~0.8"), with additional drop possible using spacers for oversized 3-inch exhausts.
-
Zero-Slip: Heavy-duty M10 bolts and locknuts, with precision round (not oval) mounting holes, completely eliminating joint slip under high-G cornering and curbing.
- Butterfly Brace weight: 6kg (~13lbs)
Total Assembly Weight: 15.5 kg (~34 lbs)
*Torsional rigidity of the standalone DCN Performance Frame Rail Reinforcement section compared to a very well known competitor's Frame Rail section (component rigidity, not total vehicle chassis torsional rigidity).
Fits first and second generation MX-5 Miata (NA 1989-1997, NB 1998-2005)
Share
